This article is a mirror article of machine translation, please click here to jump to the original article.

View: 9959|Reply: 0

VMware VMs fail to boot the system

[Copy link]
Posted on 10/27/2020 11:57:07 AM | | | |
This host supports Intel VT-x, but Intel VT-x is disabled.

Intel VT-x may be disabled if it has been disabled in the BIOS/firmware settings, or if the host has never restarted since changing this setting.

(1) Verify that Intel VT-x is enabled in the BIOS/firmware settings and "Trusted Execution" is disabled.

(2) If one of these two BIOS/firmware settings has changed, restart the host.

(3) If you have never restarted the host after installing VMware Workstation, reboot it.

(4) Update the BIOS/firmware of the host to the latest version.

This host does not support "Intel EPT" hardware-assisted MMU virtualization.

Module "CPUIDEarly" fails to start.

Failed to start the virtual machine.



solution

Restart the computer, go to the BIOS settings, and set Intel Virtual Technology under configuration to Enable.
Take HP desktop as an example, press F10 to enter the bios settings interface, check the following:



Finally, save the configuration.

(End)






Previous:.NET Framework projects under the same solution have a unified version number
Next:CentOS 8 graphical interface and command line toggle
Disclaimer:
All software, programming materials or articles published by Code Farmer Network are only for learning and research purposes; The above content shall not be used for commercial or illegal purposes, otherwise, users shall bear all consequences. The information on this site comes from the Internet, and copyright disputes have nothing to do with this site. You must completely delete the above content from your computer within 24 hours of downloading. If you like the program, please support genuine software, purchase registration, and get better genuine services. If there is any infringement, please contact us by email.

Mail To:help@itsvse.com