When the phone can't be turned on, you can press and hold the volume + key and the power button, some people say it's useless, or turn on directly, and can't turn on, I want to say, when the phone appears on the boot screen, don't let go, continue to press for about 10 seconds. This is the phone will enter the receory mode, at this time, you can choose card swipe or line swipe, I won't talk about card swipe. Let's talk about a relatively simple line brush, connect the phone to the computer, run the flashing wizard (I used the flashing wizard to brush the recovery), and then put down the flashing package, flash OK! Then you will find that the bricks are back
There are many people who can't get stuck, here is a tutorial:
First go in recovery, the post has been written, of course, you must download the flashing package of your model in advance, and then the card flashing tutorial
1. Select [Wipe data/Factory reset] and then select [Yes -- * all user data]
2. (Return to the main interface, select [Wipe Cache Partition] and then select [Yes -- Wipe Cache]
The above steps are double clearing, that is, to clear the phone data, otherwise there may be problems when flashing
3. Return to the main interface, select [Install zip from SD*] (select update from SD card) and then select [choose zip from SD*], and then select the ROM package you put into the memory card [XXXXX.ZIP]
4. Select Yes -- XXXXXX.zip (Yes -- Install xxxx.zip)
5. After waiting for the flashing to complete, return to the parent menu, and finally select [Reboot system now]-[NO] (restart the system)
The first flash restart takes a long time, please wait patiently, generally no more than 10 minutes.
|
Posted on 11/26/2014 9:19:47 AM
|
|
|
