Requirements: There are too many chargers at home, and I saw an Anker 140W gallium nitride charger from the Internet, which has four interfaces of 3C1A, of which the C1 and C2 ports both support 140W fast charging, C3 supports a maximum of 40W output, and A1 supports a maximum of 33W output. The net weight is about 275g, which is also easy to carry.
Model: B2697
ANKER official flagship store,Purchase link：https://detail.tmall.com/item.htm?id=842833397783
specification
Product Name: Anker Charger
Power: 140 watts
Ports: 4 (USB-C x 3, USB-A x 1)
PD version: 3.1
Input: 100-240V~, 50/60Hz max 2.6A
Output: C1/C2: 9.0V 3.0A, 27.0W/15.0V 3.0A, 45.0W/20.0V 5.0A, 100.0W/28.0V 5.0A, 140.0W (140.0W max) C3: 5.0V 3.0A, 15.0W/9.0V 3.0A, 27.0W/15.0V 2.65A, 39.75W/20.0V 2.0A, 40.0W (40.0W max) A: 5.0V 3.0A, 15.0W/9.0V 2.0A, 18.0W/12.0V 1.5A, 18.0W/10.0V 2.25A, 22.5W/11.0V 3.0A, 33.0W (33.0W max)
Two ports used: 140.0 watts
Use up to three ports: 140.0WW
Up to four ports iuse: 134.0W0W
Maximum total output: 140.0W max
Average Active Efficiency: 87.1%
Low load efficiency (10%): 77.18%
No-load power consumption: 0.25 watts
Show guide
Single press: Switch the screen display
Long press: Rotate the screen display
Note: Long press to rotate the screen to display. The screen will automatically turn off 60 seconds after the last interaction on any interface.
The unboxing picture is as follows:
Instructions
Charging intelligent display
The official charging test of each mobile phone model is shown below:
|
Posted on 2025-11-19 09:11:42
|
|
|
|
