1) Package content (yellow box, black sponge inside, a flow treasure box host. A white network cable, a 12V power adapter, a manual)
(2) Machine appearance (as pictured), black box, black glossy top and matte effect bottom
Front view of the machine
(3) Energy consumption, the actual test machine is 3.7 watts (as shown below), and the electricity consumption of one year is negligible, about 30 yuan per year
(4) How to wire the device, there are only 3 interfaces in the traffic treasure box, namely 100M network cable collection, USB2.0 hard disk socket, and 12V socket, as shown in the figure below
Machine interface diagram
(5) How to make the machine run?
1. Plug in the power cord of the machine and connect it to the power strip.
2. Plug in the network cable from the traffic treasure box and plug it into the home router, the router must be in DHCP mode, because the device cannot configure the IP, as shown in the figure
3. Insert the mobile hard drive into the USB port on the back of the traffic treasure box
4. Download the traffic ore APP software, log in to the user, and then click the QR code on the back of the scanning machine in the upper right corner to bind the device.
(6) How to check if it is bound? As shown below, the device will appear in my miner
(7) Click on the device, and the following interface will appear. You can see in the figure below that the mining machine automatically obtains the public IP address. The name of the mining machine can be changed by yourself, and you can choose three mining modes (1. Full speed mode, 2. Smart mode, 3. Custom mode) to set the upload speed
(8) How to judge whether the mining machine IP is a public network IP, mainly to ensure that it can run at full capacity, click on the system detection in the above picture, and the following figure will appear, where NAT must be 0, if it is not 0, then it is not a public network IP, you can also see the number of connections from the external network, the higher the number of connections, the faster the mining speed of the device
(9) The equipment can run stably every day, according to the test, it is best to restart the equipment once a day, and the mining speed will increase significantly. As shown in the figure below, click the restart button, and in about 3 minutes, you can restart the device
(10) How to judge whether the equipment is mining, as shown in Figure 1 below, in the APP, directly display the mining speed of the mining machine, indicating that it is mining, as shown in Figure 2, blue and so on are lit up, flashing from time to time, which also means that mining is also being done.
Figure 1, AAP mining speed
Figure 2. Flow treasure box work indicator
(11) How big of a hard disk does the traffic treasure box need, tested, that is, the official 150G is enough, you can see the picture below, when the cache is the highest, there is no disk occupation of more than 30G, and the hard disk has nothing to do with income, so you can choose a smaller storage device.
(12) The income issue that everyone is concerned about, if you have enough resources for 20M upload bandwidth link equipment, 1 hour is about 1-1.5 LLT, about 24-30 LLT a day, and now because of the lack of resources, there will be dissatisfaction.
(13) The traffic treasure box bUG problem found that after the machine upload speed exceeds 20M, the machine CPU will be occupied a lot, resulting in the inability to calculate the mining income. You can see the following figure 1. The real-time upload speed of my traffic treasure box. Figure 2, but the upload speed is displayed in the APP as 0, and the revenue is not calculated
Figure 1. Real-time upload speed for my traffic treasure box
(14) How to judge the fault of the equipment, I will tell you several common situations.
1. The red indicator light is on, mostly because the network is not connected, or the router and public network are not connected
|
Posted on 12/4/2017 1:37:53 PM
|
|
|
|
Posted on 12/5/2017 2:44:55 PM