This article is a mirror article of machine translation, please click here to jump to the original article.

Architect_Programmer_Code Agriculture Network»Architect › Other Technologies › Network technology › Home network starts with GL-MT3000 router
View: 1688|Reply: 2

[Router] Home network starts with GL-MT3000 router

[Copy link]
Posted on 2025-3-6 08:32:42 | | | |
Requirements: The GL-MT2500A router I used before has been running for more than half a year, and after restarting, it cannot start normally, and I can't enter the Uboot flashing interface.

Review:

Start with a GL-MT2500A router for your home network
https://www.itsvse.com/thread-10687-1-1.html

The GL-MT3000 is an AX3000 portable router that uses the Wi-Fi 6 protocol. It is an upgraded version of GL-MT1300, using a MT7981B clocked speed 1.3GHz dual-core processor, supporting 160MHz, compared with GL-MT1300, the wireless speed and signal strength have been improved excellently. It can meet the needs of multi-device connection at home, and the portable and compact design also meets the needs of travel optimization networking.

The appearance is as follows:



Official Website:The hyperlink login is visible.
Domestic firmware:The hyperlink login is visible.
Foreign firmware:The hyperlink login is visible.
Instructions:The hyperlink login is visible.

specification

interface
1 x WAN
1 x LAN
1 x USB 3.0 port
1 x Type-C power connector
1 x Reset button
1 x Toggle button
CPU
MT7981B Dual-core Processor @1.3GHz
storage
DDR4 512MB / NAND Flash 256MB
agreement
IEEE 802.11a/b/g/n/ac/ax
Wi-Fi rate
574Mbps (2.4GHz), 2402Mbps (5GHz)
antenna
2 x Retractable external Wi-Fi antennas
Ethernet port
WAN: 10/100/1000/2500Mbps
LAN: 10/100/1000Mbps
Power input
Type-C, 5V/3A
power consumption
<8W
Operating temperature
0 ~ 40°C (32 ~ 104°F)
Storage temperature
-20 ~ 70°C (-4 ~ 158°F)
Size / Weight
120 x 83 x 34mm / 196g


For example, the following figure is a comparison of other models:





Previous:Ubuntu 24.04 graphics card A10 with NVIDIA driver installed
Next:[AI] (9) Use vLLM enterprise-level deployment of DeepSeek-R1 models

Related Posts
 Landlord| Posted on 2025-3-9 18:20:27 |
Check out the OpenWRT version



 Landlord| Posted on 2025-3-9 18:42:33 |
Package source settings

/etc/opkg/distfeeds.conf

Default settings (package:9309)


Alibaba Cloud Image Acceleration Configuration (Package:9381)


Clear package cache lists and updates



Disclaimer:
All software, programming materials or articles published by Code Farmer Network are only for learning and research purposes; The above content shall not be used for commercial or illegal purposes, otherwise, users shall bear all consequences. The information on this site comes from the Internet, and copyright disputes have nothing to do with this site. You must completely delete the above content from your computer within 24 hours of downloading. If you like the program, please support genuine software, purchase registration, and get better genuine services. If there is any infringement, please contact us by email.
Mail To:help@itsvse.com