Let's take a screenshot of G2's mining first! The built-in software of G2 is claymore9.8, which can be seen on the desktop of the computer when you boot it! Left-click the claymore9.8 folder, and then drag the mouse to the bottom of this folder to see the start.bash file. Double-click to open the start.bash file, modify and fill in your ETH mining pool address, wallet address, sub-account, miner name, and other parameters. Once the modification is complete, click the "Save" button in the upper right corner to save.
The G2 configuration is as follows:
G2 is introduced as follows:
1. The mining machine does not support double mining, and currently only supports ETC and ETH
2. Only the system of the mining machine is supported, do not install other operating systems
3. Do not modify or reinstall the operating system after booting, and you can use it normally after modifying the mining configuration
4. G2 comes with a 1600W power supply, no need to configure the power supply separately
5. The cable connecting the display cannot use the adapter
6. After the power is turned on, press the power button of the mining machine after 3 seconds
7. After pressing the miner start button for a few seconds, the miner starts
8. G2 comes with a power cord, specifications: length 1.5m, 3*0.75
9. The ambient working temperature of the G2 miner is 0-40 degrees, and too high or too low will affect the use of the miner.
G2 original claymore 9.8 software download:
claymore9.8.zip
(1.6 MB, Number of downloads: 65)
|
Posted on 1/22/2018 10:37:53 AM
|
|
|
|
Posted on 1/22/2018 5:24:02 PM
|
Landlord|
Posted on 10/6/2025 4:06:50 PM
|
