Go home tonight and try two wireless route trunk setups

summer · Posted on 12/21/2015 4:44:42 PM

I originally wanted to buy a wireless routing signal amplifier, Xiaomi has one, I searched on the Internet, it can be realized with two wireless routing relays, I happen to have a wireless route with a weak signal in the past and a route with a better signal now, the SSID, channel, and password of the two routes are set to the same to achieve the same signal, covering all rooms!

Little scum · Posted on 12/21/2015 4:57:45 PM

no no no is not like that!!! A relay is a router that connects to the wireless network of another router and then transmits its own wireless information

I used to rub the neighbor's wireless network and did a relay.

Because I was in college at the time, my home network expired, and then I asked the neighbor for his wireless network password, and then, because I felt that the signal was too weak, I used my wireless router to relay to the room, and then the Internet was very fast

summer · Posted on 12/21/2015 5:04:40 PM

Xiao Zhazha Posted on 2015-12-21 17:01
My home Tengda router relay will give you a Tengda routing relay tutorial for reference http://www.jb51.net/network/346811 ...

My problem is that after the relay, there is only one route signal, and I set it all up the same, and what I want is two routes and one signal

Little scum · Posted on 12/21/2015 5:06:08 PM

Summer Posted on 2015-12-21 17:01
Are the two wireless route bridges one signal?

The two routers are not a wireless signal

In fact, you don't need to relay

If you have a network cable, you can use a network cable to connect the two routers

One router sets the POP dial-up Internet access mode, and the other sets the automatic IP acquisition mode

summer · Posted on 12/21/2015 5:01:03 PM

Xiao Zhao posted on 2015-12-21 16:57
no no no is not like that!!! A relay is a router that connects to the wireless network of another router and then transmits its own wireless ...

Are the two wireless route bridges one signal?

Little scum · Posted on 12/21/2015 5:01:30 PM

My home Tengda router relay will give you a Tengda route relay tutorial for reference http://www.jb51.net/network/346811.html

summer · Posted on 12/21/2015 5:07:33 PM

Xiao Zhazha Posted on 2015-12-21 17:06
The two routers are not a wireless signal

In fact, you don't need to relay

I have used this method for a long time, but to switch the routing signal, I want to implement two routes and one signal, covering a large area

Little scum · Posted on 12/21/2015 5:07:45 PM

Summer Posted on 2015-12-21 17:04
My problem is that after the relay, there is only one route signal, and I set it all up the same, and what I want is two routes and one signal

Well, if you haven't tried a signal, you can try it, maybe it will work

summer · Posted on 12/21/2015 5:08:33 PM

Xiao Zhao Zhao posted on 2015-12-21 17:07
Well, if you haven't tried a signal, you can try it, maybe it will work

I tried to reply to you at night, I searched on the Internet, and I can achieve a signal

Little scum · Posted on 12/21/2015 5:15:06 PM

Summer Posted on 2015-12-21 17:08
I tried to reply to you at night, I searched on the Internet, and I can achieve a signal

Hmm

Go home tonight and try two wireless route trunk setups

Related Posts